Disclaimer: Consult your Yamaha dealer concerning warranty issues before performing this modification.

I felt it worthy for myself and my passengers to have something to prevent "assists" with our feet while enjoying a ride.

The Foot Minders help to stifle my balancing instincts that I played so many years to learn, which translate to danger in riding my Rhino.

I did not want to add weight, rattles, latches or any other complications to my Rhino.
They loosened up a bit after the install, yet perform as desired.

Parts:


2 Keepers from Simpson Racing Products
1800-654-7223 Attention: Tina Creswell
Approximately $49.95 per side.


16 3/16th Pop rivets
PN 580566 From Quality Fasteners
$1.36 for 16
210-656-2323


Installation

Wet the entire keeper.

Trial Match to frame, a clamp would help for this.

Center punch the top forward rivet site and drill a 3/16" hole.

Slip 1/4" center shim (the tubing) over the rivet, sliding it flush to the rivet head.



Rivet Keeper to the Frame.



Repeat this process at the top rear, the middle front, the middle rear and along the bottom.


Enjoy having your feet safe!

Disclaimer: Do not perform this modification to your machine.

Want more RUV Tech?