Disclaimer: Consult your Yamaha dealer concerning warranty issues before performing this modification.

Remove both seats and engine cover on right side of engine you will find a green wire with a white stripe (Denoted by Yellow Arrow). Simply splice into this green wire with white stripe at any point and ground to engine, frame etc. I grounded mine to the seat mounting bracket (Denoted by Red Arrow). Note: I chose a solid green wire for splicing and grounding so as to easily identify in future. Be aware that after installing the Grizzly CDI and disabling the Reverse Rev Limiter your reverse light on the dash will light up shortly after startup, regardless of what gear you are in.

Disclaimer: Do not perform this modification to your machine.

Want more RUV Tech?